Osmo UV-Protection Oil is a satin matt Oak stain finish for exterior wood especially recommended for vertical surfaces such as select solid oak doors, windows, timber cladding, fences, pergolas, etc. This product is micro-porous, thus allowing the wood to breathe. Because the oil does not form a seal on the surface of the wood it cannot peel, flake, crack or blister. Whilst transparent, this oil does have a tint to it and is designed to give as finish the same colour as oak and penetrates into the wood grain aiding the natural elasticity of the wood and helping to reduce shrinkage and swelling.

The complete finish blocks the greying process by a UV-Protection Factor of 12 in comparison to untreated wood and reduces shrinking and swelling of the wood.  Containing active ingredients which protect from mould, algae and fungal attack, it is easy to apply as it does not dry during application, does not require a primer and can be renewed without the need for sanding. This oil prolongs the renovation time significantly when used as a top coat for staining wood

1 Litre covers approximately 16-20m2 on smooth wood - stripped and rough sawn will require more material. 

Preparation

Ensure surfaces are clean and dry before application and are not previously sealed.

Application

Apply in THIN coats with paint brush or mohair roller. Always finish your brush or roller strokes by going in the direction of the wood grain.

Osmo recommend that this product is NOT used on horizontal surfaces eg floors and Decking. It is also NOT suitable for external veneer doors.